New JN0-364 Exam Topics, Valid JN0-364 Exam Materials

Wiki Article

As the authoritative provider of JN0-364 guide training, we can guarantee a high pass rate compared with peers, which is also proved by practice. Our good reputation is your motivation to choose our learning materials. We guarantee that if you under the guidance of our JN0-364 study tool step by step you will pass the exam without a doubt and get a certificate. Our JN0-364 Learning Materials are carefully compiled over many years of practical effort and are adaptable to the needs of the JN0-364 exam. We firmly believe that you cannot be an exception.

As we all know, the influence of JN0-364 exam guides even have been extended to all professions and trades in recent years. Passing the JN0-364 exam is not only for obtaining a paper certification, but also for a proof of your ability. Most people regard Juniper certification as a threshold in this industry, therefore, for your convenience, we are fully equipped with a professional team with specialized experts to study and design the most applicable JN0-364 Exam prepare. We have organized a team to research and JN0-364 study question patterns pointing towards various learners.

>> New JN0-364 Exam Topics <<

New JN0-364 Exam Topics Aids You to Evacuate All Your Uncertainties before Purchase

Like the Web-based Service Provider Routing and Switching, Specialist (JNCIS-SP) practice exam, the Desktop JN0-364 practice test software of PassTorrent provides its valuable customers with JN0-364 test questions which are very similar to the actual Service Provider Routing and Switching, Specialist (JNCIS-SP) exam questions. There is no hustle. The Service Provider Routing and Switching, Specialist (JNCIS-SP) JN0-364 Practice Test material is updated and created after feedback from more than 90,000 professionals around the globe. A free demo of any Service Provider Routing and Switching, Specialist (JNCIS-SP) exam dumps format will be provided by PassTorrent to the one who wants to assess before purchasing.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q118-Q123):

NEW QUESTION # 118
Exhibit:

Referring to the exhibit, R1 and R2 are configured to run IS-IS. The IS-IS adjacency between R1 and R2 is up. What does the output of the show isis interface command tell you about R1?

Answer: A

Explanation:
In theIS-IS (Intermediate System to Intermediate System)protocol as implemented in Junos OS, routers can operate at two hierarchical levels:Level 1 (L1)for intra-area routing andLevel 2 (L2)for inter-area backbone routing. By default, a Juniper router and its interfaces are configured to act asLevel 1/2, meaning they will attempt to form adjacencies at both levels simultaneously.
According to Juniper Networks technical documentation, the show isis interface command provides a granular view of how the protocol is interacting with specific local links. In the provided exhibit, we must examine the L (Level)column and theDR (Designated Router)status columns to understand R1's operational state.
* Level Configuration:Under the L column for both the physical interface ge-0/0/0.0 and the loopback lo0.0, the value is strictly2. This indicates that these interfaces have been explicitly configured to operate only at Level 2.
* Adjacency Capabilities:For the interface ge-0/0/0.0, the Level 1 DR field is marked asDisabled. This confirms that R1 is not participating in Level 1 operations on this link; it will not transmit Level 1 Hello PDUs, nor will it listen for them. Consequently, R1 is incapable of forming a Level 1 adjacency with R2 on this segment.
* Metric Implications:The exhibit shows an L1/L2 Metric of100/100. In Junos, "narrow" metrics (the default) are limited to a maximum value of 63 per interface. A metric of 100 indicates thatwide metrics (wide-metrics-only) have been enabled. Therefore, option A is incorrect because the routerisusing wide metrics.
Since the prompt states the adjacency is "up," and the interface is restricted to Level 2, we can conclude that R1 only forms a Level 2 adjacency with R2 (Option B). Even though an L1 metric of 100 is displayed in the table as a configured value, it is not actually "advertised" in a Link-State PDU because the Level 1 protocol is disabled on that interface.


NEW QUESTION # 119
Which new field is added to an IPv6 header as compared to IPv4?

Answer: C

Explanation:
The flow label is a new field added to IPv6 headers that was not present in IPv4 headers. It is used to identify packets that require special handling by routers, particularly for quality-of-service (QoS) purposes.


NEW QUESTION # 120
Referring to the exhibit. You are asked to configure OSPF between routers R1 and R2 using IPv6 addresses. Which two tasks will accomplish your objective? (Choose two.)

Answer: A,C

Explanation:
To configure OSPFv3 (the version of OSPF that supports IPv6), you would use the set protocols ospf3 command with the appropriate area and interface. OSPFv3 requires a 32-bit router ID just like OSPFv2, which is typically an IPv4 address. OSPF does not use a 128-bit router ID, so answer D is incorrect.


NEW QUESTION # 121
Click the Exhibit button. A router called R6 is the ingress router for an LSP called R6_TO_R10_700m.
Referring to the exhibit, which statement is correct about the bandwidth reservation across this entire path?

Answer: D

Explanation:
The output shows the LSP bandwidth is 700 Mbps and its RSVP priorities are set with a setup priority of 2 and a holding priority of 1. Bandwidth admission and reservation along the path are evaluated using the setup priority, so the 700 Mbps is accounted against the unreserved bandwidth buckets for setup priority 2 and all lower-preference priorities below it.


NEW QUESTION # 122
Click the Exhibit button. All devices in the network are configured correctly and the path requirements are valid. Referring to the exhibit, which two statements are correct? (Choose two.)

Answer: A,D

Explanation:
According to the exhibit, the primary LSP is configured with a strict path via R2 to R4. Since the configuration shows valid next-hops and there is no indication of any issues, the primary LSP will be signaled and its state will be up. The secondary LSP with any-path is also configured and will be signaled as a backup; therefore, its state will be up as well, ready to take over if the primary fails.


NEW QUESTION # 123
......

Service Provider Routing and Switching, Specialist (JNCIS-SP) exam tests hired dedicated staffs to update the contents of the data on a daily basis. Our industry experts will always help you keep an eye on changes in the exam syllabus, and constantly supplement the contents of JN0-364 test guide. Therefore, with our study materials, you no longer need to worry about whether the content of the exam has changed. You can calm down and concentrate on learning. At the same time, the researchers hired by JN0-364 Test Guide is all those who passed the Service Provider Routing and Switching, Specialist (JNCIS-SP) exam, and they all have been engaged in teaching or research in this industry for more than a decade. They have a keen sense of smell on the trend of changes in the exam questions. Therefore, with the help of these experts, the contents of JN0-364 exam questions must be the most advanced and close to the real exam.

Valid JN0-364 Exam Materials: https://www.passtorrent.com/JN0-364-latest-torrent.html

Finally, I decided to try something new for my exam prep and chose PassTorrent Valid JN0-364 Exam Materials Aruba exam module, Juniper New JN0-364 Exam Topics And the test engine on ITexamGuide.com will give you simulate the real exam environment, Juniper New JN0-364 Exam Topics If you choose us you just need 1-2 days preparation before examination, The last but not least, if you have any questions after buying our JN0-364 exam torrent, all of the after-sale service staffs will help you to solve your problem for all their worth.

These two areas of study can help to reduce operating costs, Skype Test Certification JN0-364 Cost for Organizations: Case Studies, Finally, I decided to try something new for my exam prep and chose PassTorrent Aruba exam module.

Effectiveness of Juniper JN0-364 Actual Questions for Certification Success

And the test engine on ITexamGuide.com will give you simulate JN0-364 the real exam environment, If you choose us you just need 1-2 days preparation before examination, The last but not least, if you have any questions after buying our JN0-364 exam torrent, all of the after-sale service staffs will help you to solve your problem for all their worth.

You only focus on new JN0-364 practice questions for certifications, due to experts' hard work and other private commitments.

Report this wiki page